We specialize in gun coatings, gun repair, gun stock refinishing, and cerakote coatings, which are 8x's more durable than duracoat coatings.
Using a unique ceramic backbone, Cerakote Coatings
improve performance and reliability
over conventional finishes. This
state-of-the-art coating technology out performs any
competitive coating in
both laboratory settings and real world applications.
"C" series ceramic gun coatings (For High Temperature applications)
The "C" series ceramic gun coatings were designed as a single
component ambient cure system. As higher temperatures are reached the
"C" series will flux, becoming harder and more abrasion resistant.
After a full cure this coating provides excellent resistance to most cleaning
solvents and chemicals. It has a pencil scratch hardness (ASTM
D3363) of 7h, exceeded the 5% salt spray test (ASTM B117) with well
over 550 hrs, an adhesion cross cut tape (ASTM D3359) of 5B, & has an
optimal film thickness of 0.5 to 1.0 mils. It has a heat stability rating in
excess of 1200 degrees f for extended periods without failing.
"H" series ceramic gun coatings (Firearm Coating)
The "H" series was designed as a two part thermal cure system. It
provides a very high quality, long lasting finish with high corrosion
resistance. It offers unparalleled levels of abrasion resistance and hardness
because of the two part component system. The "H" series has a
viscosity #2 Zahn cup of 13.0 sec, an optimal film thickness of 0.5 to 1.0
mils, passes the 5% salt spray test (ASTM B117) in excess of 2,500 hrs, has a
pencil scratch hardness (ASTM D3363) of 7h, the adhesion cross cut tape (ASTM
D3359 of 5B, and heat stability of 525 degrees f for extended periods
without failing.
Micro Slick
Micro Slick is designed to create a permanent lubricated surface to impede galling and the seizing of components. Like or dissimilar materials can benefit from the application of this material. The suggested application processes allow the coating to become an intrinsic part of the component rather than a coating on the surface. Micro Slick's formulation prevents surface-to-surface contact, thus reducing friction and wear between mating surfaces. The exceptional low resistant to shear enables the Micro Slick coated surface to operate with extremely low friction.
Coating
Information
Using a unique
ceramic backbone,
CerakoteTM
Firearm Coatings
improve performance and reliability over conventional finishes. This
state-of-the-art coating technology out performs any competitive
coating in
both laboratory settings and real world
applications.
-->
CerakoteTM
is the
very best
coating available for your firearm and accessories.
CerakoteTMwas
developed by
NIC Industries Inc. CerakoteTMwas
designed to provide a high quality,
long
lasting finish, with high corrosion protection and durability.
CerakoteTMis
available
in two compounds "C" series which is an ambient
(air-dry) cure coating & "H" series which is a thermal cure
coating. Teflon based gun coatings do not
compare to the "C" &
"H" series of CerakoteTMwhich offers unparalleled levels of
hardness and
abrasion resistance because of their unique ceramic
backbone
CerakoteTMis
available in 35 standard colors.
It
provides excellent corrosion protection, outstanding abrasion
resistance,
extreme hardness, & unmatched durability.
CerakoteTMsurpasses Teflon based
coatings for wear resistance by well over 60%.
CerakoteTMhas
self lubricating
elements incorporated through out the coatings, this allow firearms to
function
with little or no fluid lubricants that typically attract abrasive dust
particles. CerakoteTMperforms extremely well in
automatics with high
cyclic rates.
To prove CerakoteTM is the leading firearm coating, NIC
hired an independent military testing facility to perform a
blind side
by side comparison between CerakoteTM, KG Gun-Kote
(listed as competitor 1)
and DuraCoat Firearm Finish (listed as competitor 2). In
every test CerakoteTM out performed both competitors'
products. All tests were performed in accordance to the ASTM test
listed in the photos.
-->
"C"
series ceramic gun coatings (For synthetics,
polymers, plastics,
ect.)
The "C" series ceramic gun coatings were designed as a single
component ambient cure system. As higher temperatures are
reached the
"C" series will flux, becoming harder and more abrasion resistant.
After a full cure this coating provides excellent resistance to most
cleaning
solvents and chemicals. It has a pencil scratch hardness (ASTM
D3363) of 7h, exceeded the 5% salt spray test (ASTM
B117) with well
over 550 hrs, an adhesion cross cut tape (ASTM D3359) of 5B,
& has an
optimal film thickness of 0.5 to 1.0 mils. It has a heat stability
rating in
excess of 1200 degrees f for extended periods without
failing.
"H"
series ceramic gun coatings (oven cure for metals) The
"H" series was designed as a two part thermal cure system. It
provides a very high quality, long lasting finish with high corrosion
resistance. It offers unparallel levels of abrasion resistance and
hardness
because of the two part component system. The "H" series has a
viscosity #2 Zahn cup of 13.0 sec, an optimal film thickness of 0.5 to
1.0
mils, passes the 5% salt spray test (ASTM B117) in excess of 2,500 hrs,
has a
pencil scratch hardness (ASTM D3363) of 7h, the adhesion cross cut tape
(ASTM
D3359 of 5B, and heat stability of 525 degrees f for extended
periods
without failing.